Air compressor, 80-gallon (Ingersoll Rand T30)

← Back to tools we have

[[File:{{{id}}}.jpg|250px]]
Type	Two-stage reciprocating compressor
Make/Model	Ingersoll-Rand T30 242ON5
Serial number	30T 758634
Original owner	Kyle Paavola
Loan status	Long Term Loan
Arrival date
Location	Right of the welding bench
Functional status	Working
Usage permissions	Members and friends only
Certification	To be determined. Do not start if you don't feel qualified
Wiki-ID	[[{{{id}}}]]
Label	1.0" 1.5" 2.0"

Specs

This compressor is an industrial grade machine to be treated with some degree of respect. This 5HP compressor is electrically driven by 208V single phase available through the same pigtail that powers the TIG welder.

Use and Maintenance

verbatim from the sticker right on the compressor but just in case you have not read it:

CAUTION: TURN OFF POWER BEFORE SERVICING

Daily:

• Drain any condensate from ceceiver and traps
• Check for any unusual noise or vibration

Weekly

• Check for proper oil level

Monthly

• Clean air filter
• Clean all external parts of compressor and driver
• Test relief valve manually for proper operation
• Inspect entire air system for leaks
• Inspect oil for contamination and change if necessary
• Check belt tension and wear

Every 3 months:

• Change oil using an approved lubricant
• Inspect valve assemblies

for more information, check the operator's manual at: http://manualarchive.ingersollrandproducts.com/ir_pdfs/Compressed%20Air/Air%20Compressors/Reciprocating%20Compressor/22607402.PDF

Approved Lubricant

ONLY Ingersoll-Rand All season oil is currently approved for use in this compressor. You must check for the presence of oil in the compressor pan before operating this machine.