View source for Metal Shear Brake Roll - (New Magnum 52) ID:180

{{Equipment page
| toolname = Metal 3-in-1 Shear, Brake, Roller
| model = Magnum 52"
| serial = ?
| owner = Protospace
| loanstatus = Owned
| arrived = 2024
| location = Metal shop
| status = First installation/calibration in progress Apr 2024
| permission = Members
| certification = NMO
| photo = 180.jpg
| caption = 
| id = 180
}}

==Specs==
Advertised specs:
* 52" wide
* 16 Gauge Aluminum 
* 18 Gauge Mild Steel
* 9 removable fingers from 1" - 15"
* 3" slip rolls with forming grooves

==Usage==
ABSOLUTELY, POSITIVELY, VERY VERY NO WIRE CUTTING/BENDING WITH THE BRAKE/SHEAR.

Lots of pinch points - Caution, this will cut, crush, and eat any body parts you put in the moving bits. Do not put anything squishy near anything hard or all your blood will fall out, and we'll have to call your emergency contact.

Read manual linked below to understand adjustments. The roller gears require adjustment to mesh properly or they will be damaged.

==History==
Replaces the identical model brought in and eventually returned to John. Thanks John!

Pitch https://forum.protospace.ca/t/pitch-a-replacement-for-the-metal-shear-that-has-returned-home/4365/2

Discussion: https://forum.protospace.ca/t/3-in-1-brake-shear-roller/6179



==Troubleshooting==
Turn it off and then on again.

==Documentation==
Different brand of the same machine with a better manual than what came with the machine from KMS:

[[:File:Metal_Shear_Brake_Roll_-_Magnum_copy.pdf]]

[[Category:Metalworking_tools]]