View source for 3D Printer, FFF (Bambu Lab P1S) ID:182

{{Equipment page
| toolname = Bambu Lab 3D Printer
| model = P1S
| serial = ?
| owner = Protospace
| loanstatus = 
| arrived = 
| location = 3D printer room
| status = Working
| permission = Open to all
| certification = 
| photo = 182.jpg
| caption = 
| id = 182
}}

==Specs==
{| class="wikitable"
|+
!Body
!
|-
|Build Volume
|256 x 256 x 256 mm³
|-
|Chassis
|Welded Steel
|-
|Shell
|Enclosed (Plastic and glass)
|+
!Speed
!
|-
|Max Speed of Toolhead
|500 mm/s
|-
|Max Acceleration of Toolhead
|20 m/s²
|+
!Toolhead
!
|-
|Hot End
|All-metal
|-
|Nozzle
|Stainless steel
|-
|Max hot end temperature
|300 °C
|-
|Toolhead cable
|Enhanced toolhead cable with cable chain
|+
!Cooling and filtration
!
|-
|Control Board Fan
|Closed Loop Control
|-
|Chamber Temperature Regulator Fan
|Closed Loop Control
|-
|Auxiliary Part Cooling Fan
|Closed Loop Control
|-
|Air Filter
|Activated Carbon Filter
|+
!Supported filaments
!
|-
|PLA, PETG, TPU, PVA, PET
|Ideal
|-
|ABS, ASA
|Ideal
|-
|PA, PC
|Capable
|}

==Usage==
See [https://forum.protospace.ca/t/3d-printing-at-protospace/6275 this forum posting] for a quick rundown. Check Bambu Lab Wiki for more.

==Troubleshooting==
===Unhandled unknown exception; terminating the application===
* Possibly two instances of Bambu Studio running. Open Windows Task Manager and end any open applications.

==Documentation==
[https://wiki.bambulab.com/en/p1 Bambu Lab Wiki P1 Series]

[[Category:3D printing tools]]