Garment graphic printer, direct inject (Brother GT-361) ID:146
(Redirected from Garment graphic printer, direct inject (Brother GT-361))
Jump to navigation
Jump to search
← Back to tools we have
 Brother GT-3 Series Direct Inject Garment Printer | |
| Type | Brother GT-3 Series Direct Inject Garment Printer |
| Make/Model | GT-361 |
| Serial number | ?? |
| Original owner | Robb Leece |
| Loan status | ?? |
| Arrival date | ?? |
| Location | Sewing Room |
| Functional status | ?? |
| Usage permissions | ?? |
| Certification | ?? |
| Wiki-ID | 146 |
| Label | 1.0" 1.5" 2.0" |
Manuals
GT-3 Series Instruction Manual
Brother Direct-To-Garment Technical Support Page - Pick the GT-3 PRINTERS section for FAQs and Downloads
History
Late 2021
White cartridge is dead and non-repairable - we've tried. Story goes that it was unplugged against the warning labels, so it couldn't maintain its mandatory flush/clean cycle, and the titanium dioxide set in the lines/cartridge. Good luck getting that out. Replacement is prohibitively expensive.
White is disabled in firmware. "Lines need to be cleaned" and it'll CMY, no-K.
2022-09-15
Robb L has taken the DTG printer home. Legend has it he was able to fix it within 1 hour.