Tools we have

Notes

Fill in any data you know of/own in the following suggested format (alphabetically):

1. Tool Name (Brand/Color)
2. Tool Owner/Donator name if any.
3. Tool Ownership Status (Protospace property, on loan, semi-permanent loan [likely staying at PS but donor might take it back some day], private)
4. Tool Status (working/needs fixing/finicky/etc)
5. Tool Use Restrictions (Open to all, ask owner first, read instructions first, must be trained/certified).

Please add pictures too.

Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.

Treat tools with respect and care! Also clean them up and put them back before you leave :)

3D Printing/Cutting Tools

• 80W Chinese Laser Cutter with a 4' x 3' cutting area http://www.rabbitlaserusa.com/laser_RL1290.asp - Brian Queen - On Loan (August?) - Working - Must be certified
• RapMan 3D Printer - Brian Queen - ?? - ?? - ??
• Utilimaker 3D Printer - Brian Queen - ?? - Working okay, needs heated bed - ??

Automotive Tools

• Compressor (big) - ?? - ?? - Engine needs fixing - ??
• Compressor (small/black) - ?? - ?? - Working - ??
• Floor Jack (Certified/blue) - ?? - ?? - Working - ??
• Socket/Wrench Set - Ben Reed - PS Owned - Working - Open To All

Electronics Tools

• Oscilloscope (Kikusui COS5060 60Mhz) - ?? - ?? - ??
• Oscilloscope (Tektronics 2225 50Mhz) - ?? - ?? - ??
• Pick & Place (Multitroniks) - ?? - ?? - Needs Fixing(?) - ??

Metalworking Tools

• Angle Grinder w/ case (Kawasaki/Green) - ?? - ?? - Working - ??
• Bench Grinder (Baldor/Red) - ?? - ?? - Working - ??
• Bench Grinder (Powerfist/Grey) - ?? - ?? - Working - ??
• Drill Press - ?? - PS Owned - Working - ??
• Forge - ?? - ?? - ?? - ??
• Mill (big) (Craftex/Green) - ?? - ?? - Needs Gear Fix - ??
• Mill (small CNC) (MAXNC 10/blue) - Brian Queen - ?? - ?? - ??
• Tap & Die set (Mastercraft) - ?? - ?? - Working - ??
• Vice (Irwin) - ?? - ?? - Working - ??

Woodworking/Plastic Tools

• Chop Saw (Ryobi/Blue) - ?? - ?? - Working - ??
• Cutoff Saw (B&D) - ?? - ?? - Working - ??
• Cutoff Saw (Red) - ?? - ?? - ?? - ??
• Corded Drill (Dewalt/Yellow - ?? - ?? - Working - ??
• Corded Dremel & Accessories - ?? - ?? - Working - ??
• Cordless Drill (Orange) - ?? - ?? - Working - ??
• Cordless Dremel & Case (Grey) - ?? - ?? - Working - ??
• Jiggaw (Skil/Black) - ?? - ?? - Working - ??
• Planer - ?? - ?? - ?? - ??
• Sander Mouse (Ryobi/Blue) - ?? - ?? - Working - ??
• Scroll Saw (Dremel/Grey) - ?? - ?? - Working - ??
• Scroll Saw (Mastercraft/Blue) - ?? - ?? - Working - ??
• Workmate - ?? - ?? - Working - ??

Misc Tools

• Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
• Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
• Shop Vac (Orange) - ?? - ?? - ??
• Vacuum Former - ?? - ?? - Needs serious fixing/case - ??

Old Content To Be Merged With Above

Protospace tools

• Makerbot cupcake CNC

Member tools and gadgets

Tremaine:

• 4 1 ton vehicle jack stands
• metric ratchet set with 3/8" and 1/4" drivers (6mm to 19mm sockets)
• metric ratchet 1/2" driver, 1 short extender and 1 long, sockets from 12mm to 24mm (some deep impact)
• metric crescent wrenches 8mm - 24mm
• variety of wrenches, standard screwdrivers
• Metric hex key set
• tap & die set
• Heat gun
• Torque wrench
• Breaker bar with 1/2" driver

(more to be added)

Mike Hermann

• Hitachi 200 MHz digital scope
• Weller Adjustable soldering station
• 2 channel 30 VDC bench supply
• Current clamps for multimeter
• Std metal working handtools
• Std wood working handtools
• Makita LiON contractor pack (4 tool: rotary saw, sabre/sawsall, driver, drill)
• Paintgun (compressor driven)
• Rotary saw
• Jigsaw
• 2.5 T rollaway jack
• Metric and Imperial wrench set
• Large torque wrench
• Shop vac
• Dremel and kit
• Bit set (std drivers, allan key, torx, torx secure, etc)
• (more to be added)

Dan VE6IBM

• PA System
• 60 Mhz 3 channel scope
• Surface Mount Technology Hot Air Rework Station (with soldering tools)
• (more to be added)