Tools we have: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
m (→‎Miscellaneous Tools: fixing (double) redirects on sewing machine image links)
(→‎Miscellaneous tools: Add links=###)
 
(233 intermediate revisions by 20 users not shown)
Line 1: Line 1:
[[File:Click_tip.png|right]]
Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!


We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.


'''Adding a new tool to the wiki?''' Follow this [[Adding New Tools Procedure|procedure]].
If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wish list]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].
 
We can always use new tools! Please feel free to [[List_of_Links_and_Email_Addresses|contact Protospace]] to donate, arrange for pickup, or drop them off in person.
 
If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools We Want| tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://groups.google.com/forum/#!forum/protospace-discuss discussion group].


We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].
We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].


__TOC__


{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}
==Rapid prototyping tools==


{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}


==Rapid Prototyping Tools==
<gallery mode="nolines" widths="160" heights="160">
:''Main article: [[Our 3D printers]]''
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
<gallery>
File:3.jpg|link=3|[[3D printer, FFF (PrusaMD) ID:3]]
File:2.jpg|link=2               |[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:3.jpg|link=3               |[[3D printer, FFF (PrusaMD) ID:3]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:4.jpg|link=4              |[[3D printer, FFF, delta (Kossel) ID:4]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:5.jpg|link=5              |[[3D printer, SLA (mUVe 1) ID:5]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:6.jpg|link=6              |[[Laser cutter, large (Rabbit Laser RL-x-1290) ID:6]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:107.jpg|link=107           |[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|link=153|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>
</gallery>


==Automotive Tools==
==Automotive tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|link=8              |[[Floor jack, blue ID:8]]
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|link=9              |[[Trolley jack and axle stand kit (Certified) ID:9]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:10.jpg|link=10            |[[Press (Powerfist) ID:10]]
File:11.jpg|[[Socket set ID:11]]
File:11.jpg|link=11            |[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
</gallery>
</gallery>


==Chemistry==
==Chemistry==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|link=12            |[[Oxygen concentrator (OGSI OG-15) ID:12]]
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>
</gallery>


*Hot Plate/Stirrer (Lab Line/Orange) - James - Private - Working - Ask Owner First
==Electronics equipment==
*Hot Plate/Stirrer (VWR/White) - James - Semi-Permanent Loan - Working, needs new ceramic top - Ask Owner First
 
*Rheostat For Heating Mantle (Green) - James - Private - Working - Ask Owner First
<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>


==Electronics Tools==
==Metalworking tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:13.jpg|link=13            |[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:14.jpg|link=14            |[[Counter (Lafayette 54517) ID:14]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:15.jpg|link=15            |[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:16.jpg|link=16            |[[Function generator (John's) ID:16]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:17.jpg|link=17        |[[Function generator (Krohn–Hite 5100A) ID:17]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:18.jpg|link=18            |[[Heat gun (Powerfist) ID:18]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:19.jpg|link=19            |[[Logic analyzer (HP 1631D) ID:19]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:20.jpg|link=20            |[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:45.jpg|[[Foundry, propane ID:45]]
File:21.jpg|link=21            |[[Oscilloscope (Brunelle 2925) ID:21]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:22.jpg|link=22            |[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:23.jpg|link=23            |[[Oscilloscope (Tektronix 2225) ID:23]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:24.jpg|link=24            |[[Oscilloscope (Tektronix 2465A) ID:24]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:25.jpg|link=25            |[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:26.jpg|link=26            |[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:27.jpg|link=27            |[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:28.jpg|link=28            |[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:29.jpg|link=29            |[[Reflow oven (Hamilton Beach) ID:29]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:30.jpg|link=30            |[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:54.jpg|[[Vise, giant ID:54]]
File:31.jpg|link=31            |[[Solder fume extractor (Metcal) ID:31]]
File:56.jpg|[[Welding magnets ID:56]]
File:32.jpg|link=32            |[[UV photomasker (Dan's) ID:32]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:33.jpg|link=33            |[[Waveform generator (Syscomp WGM-101) ID:33]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:34.jpg|link=34            |[[Waveform monitor (Tektronix 1730) ID:34]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
</gallery>
</gallery>


==Metalworking Tools==
==Woodworking and plasticworking tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|link=35            |[[Angle grinder (DeWalt) ID:35]]
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:36.jpg|link=36        |[[Anvil (Chris's) ID:36]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:37.jpg|link=37            |[[Bandsaw, metal, horizontal ID:37]]
File:59.jpg|[[Clamps ID:59]]
File:38.jpg|link=38            |[[Bench grinder (Baldor) ID:38]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:39.jpg|link=39            |[[Bench grinder (Powerfist) ID:39]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:40.jpg|link=40            |[[Bench grinder (Trademaster PR14210) ID:40]]
File:67.jpg|[[Drill, hand, cordless (DeWalt) ID:67]]
File:41.jpg|link=41            |[[Brake, box and pan, 24" (Magnum) ID:41]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:42.jpg|link=42            |[[Drill press (Mastercraft) ID:42]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:43.jpg|link=43            |[[Forge (Travis's) ID:43]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:NoImage.png|link=44        |[[Forge, propane, pass-through ID:44]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:45.jpg|link=45            |[[Foundry, propane ID:45]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:46.jpg|link=46            |[[Lathe, metal (Challenger 1660G) ID:46]]
File:108.jpg|[[Planer (Jet JPM-13CS) ID:108]]
File:47.jpg|link=47            |[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:53.jpg|link=53            |[[Metal shear (Magnum) ID:53]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:48.jpg|link=48            |[[Milling machine (ACRA AM4V) ID:48]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:49.jpg|link=49            |[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:50.jpg|link=50            |[[Oxyacetylene torch, large ID:50]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:51.jpg|link=51            |[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:52.jpg|link=52            |[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:84.jpg|[[Sander, belt/disc (Dremel 730) ID:84]]
File:54.jpg|link=54            |[[Vise, giant ID:54]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:56.jpg|link=56            |[[Welding magnets ID:56]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:109.jpg|link=109          |[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:96.jpg|link=96            |[[Spot welder ID:96]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>
</gallery>


==Woodworking and Plasticworking Tools==
==Textile, Vinyl, and Media tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:57.jpg|link=57            |[[Bandsaw, green ID:57]]
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:105.jpg|link=105          |[[Bandsaw (Shop Fox W1706) ID:105]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:58.jpg|link=58            |[[Belt and disc sander (CWD 15-315) ID:58]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:59.jpg|link=59            |[[Clamps ID:59]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:60.jpg|link=60            |[[Drill, hand, corded (Black & Decker) ID:60]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:61.jpg|link=61            |[[Drill, hand, corded, black (Jobmate) ID:61]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:62.jpg|link=62            |[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:63.jpg|link=63            |[[Drill, hand, cordless (Black & Decker) ID:63]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:64.jpg|link=64            |[[Drill, hand, cordless (Black & Decker FireStorm) ID:64]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:65.jpg|link=65            |[[Drill, hand, cordless, with detachable chuck (Black & Decker FireStorm) ID:65]]
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:66.jpg|link=66            |[[Drill, hand, cordless, with quick connector (Black & Decker FireStorm) ID:66]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:67.jpg|link=67            |[[Drill, hand, cordless (DeWalt) ID:67]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:68.jpg|link=68            |[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|link=69            |[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|link=70            |[[Jigsaw, corded (Black & Decker) ID:70]]
File:71.jpg|link=71            |[[Jigsaw, cordless (Black & Decker FireStorm) ID:71]]
File:72.jpg|link=72            |[[Jigsaw (Skil) ID:72]]
File:73.jpg|link=73            |[[Jointer, grey ID:73]]
File:74.jpg|link=74            |[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:75.jpg|link=75            |[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|link=108          |[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|link=76            |[[Plate joiner (Porter Cable 557) ID:76]]
File:77.jpg|link=77            |[[Radial arm saw (Craftsman) ID:77]]
File:78.jpg|link=78            |[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|link=79            |[[Rotary tool, cordless (Dremel) ID:79]]
File:80.jpg|link=80            |[[Router table (Craftsman) ID:80]]
File:NoImage.png|link=Router table (Jeff's)|[[Router table (Jeff's)]]
File:82.jpg|link=82            |[[Sabre saw (Black & Decker FireStorm) ID:82]]
File:83.jpg|link=83            |[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|link=84            |[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|link=85            |[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|link=106          |[[Sander, drum (General International 15-250 M1) ID:106]]
File:86.jpg|link=86            |[[Sander, hand, cordless (Black & Decker FireStorm) ID:86]]
File:87.jpg|link=87            |[[Sander, palm (Skil) ID:87]]
File:88.jpg|link=88            |[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|link=89            |[[Scroll saw (Dremel) ID:89]]
File:90.jpg|link=90            |[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:91.jpg|link=91            |[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|link=92            |[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|link=93            |[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg|link=94            |[[Vise, wood ID:94]]
File:95.jpg|link=95            |[[Vise, wood (Travis's) ID:95]]
</gallery>
</gallery>


==Measuring and Inspection Tools==
==Measuring and inspection tools==
See also the [[#Electronics Tools|Electronics Tools section on this page]] for electrical and electronic measurement and test equipment.
 
<gallery>
{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}
File:97.jpg|link=97            |[[Inspection mirror, 18" gooseneck ID:97]]
 
File:98.jpg|link=98            |[[Magnifier lamp, large, with lid ID:98]]
<gallery mode="nolines" widths="160" heights="160">
File:99.jpg|link=99            |[[Magnifier lamp, large, without lid ID:99]]
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:100.jpg|link=100          |[[Magnifier lamp, small, with lid ID:100]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:101.jpg|link=101          |[[Measuring tapes ID:101]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:NoImage.png|link=102      |[[Rulers ID:102]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:NoImage.png|link=103      |[[Squares ID:103]]
File:101.jpg|[[Measuring tapes ID:101]]
File:104.jpg|link=104          |[[Thermometer, infrared (H64) ID:104]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>
</gallery>


==Miscellaneous Tools==
==Miscellaneous tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:110.jpg|link=110          |[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:111.jpg|link=111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:111.jpg|link=111           |[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=112|[[Air compressor, silent ID:112]]
File:112.jpg|link=112           |[[Air compressor, silent ID:112]]
File:115.jpg|link=115|[[Engraver ID:115]]
File:113.jpg|link=113          |[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:116.jpg|link=116|[[Hand truck, red ID:116]]
File:114.jpg|link=114          |[[Bicycle tire jig ID:114]]
File:117.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:115.jpg|link=115           |[[Engraver ID:115]]
File:118.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:116.jpg|link=116           |[[Hand truck, red ID:116]]
File:127.jpg|link=127|[[Oil can, blue ID:127]]
File:Hot-wire foam cutters.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:128.jpg|link=128|[[Painting tools ID:128]]
File:Hot-wire foam cutters.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:129.jpg|link=129|[[Pinball machine (Williams Road Kings) ID:129]]
File:Work light, B&D FireStorm.jpg|link=Lamp, cordless (Black & Decker FireStorm)|[[Lamp, cordless (Black & Decker FireStorm)]]
File:130.jpg|link=130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:Oil can, blue.jpg|link=Oil can, blue|[[Oil can, blue]]
File:131.jpg|link=131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:Painting tools box.jpg|link=Painting tools|[[Painting tools]]
File:132.jpg|link=132|[[Shop vacuum, orange ID:132]]
File:Pinball, Road Kings.jpg|link=Pinball machine (Williams Road Kings)|[[Pinball machine (Williams Road Kings)]]
File:133.jpg|link=133|[[Staple gun (Arrow T-18) ID:133]]
File:Sandblasting cabinet, Powerfist (blue).jpg|link=Sandblasting cabinet, floor, blue (Powerfist)|[[Sandblasting cabinet, floor, blue (Powerfist)]]
File:122.jpg|link=122|[[Tile work surfaces ID:122]]
File:Electric screwdriver, B&D.jpg|link=Screwdriver, electric, cordless (Black & Decker)|[[Screwdriver, electric, cordless (Black & Decker)]]
File:123.jpg|link=123|[[Tile work surfaces ID:123]]
File:Electric screwdriver, cordless, B&D FireStorm (small).jpg|link=Screwdriver, electric, cordless (Black & Decker FireStorm, small)|[[Screwdriver, electric, cordless (Black & Decker FireStorm, small)]]
File:134.jpg|link=134|[[Vacuum cart ID:134]]
File:Electric screwdriver, B&D FireStorm (with quick connector).jpg|link=Screwdriver, electric, cordless, with quick connector (Black & Decker FireStorm)|[[Screwdriver, electric, cordless, with quick connector (Black & Decker FireStorm)]]
File:136.jpg|link=136|[[Vacuum cleaner, portable ID:136]]
File:Screwdriver magnetizer and demagnetizer, Wiha 40010.jpg|link=Screwdriver magnetizer/demagnetizer (Wiha 40010)|[[Screwdriver magnetizer/demagnetizer (Wiha 40010)]]
File:137.jpg|link=137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:Sewing machine, Singer 1802.jpg|link=120|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:161.jpg|link=161|[[Laminator (Scotch TL902) ID:161]]
File:Sewing machine, Relsew.jpg|link=119|[[Sewing machine, industrial (Relsew) ID:119]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:Shop_Vac_Orange.jpg|link=Shop vacuum, orange|[[Shop vacuum, orange]]
File:169.png|link=169|[[ADS-B Base Station, FlightAware, ID:169]]
File:Staple gun, Arrow T-18.jpg|link=Staple gun (Arrow T-18)|[[Staple gun (Arrow T-18)]]
File:176.jpg|link=176|[[Vending machine, pop (Vendo 576) ID:176]]
File:Vacuum former with reservoir, oven, and debris.jpg|link=Vacuum cart|[[Vacuum cart]]
File:177.jpg|link=177|[[Vending machine, snacks (Crane 173) ID:177]]
File:Portable_vacuum_cleaner.jpg|link=Vacuum cleaner, portable|[[Vacuum cleaner, portable]]
File:Vac_Pump.jpg|link=Vacuum pump|[[Vacuum pump]]
File:Vacuum pump (vacuum former).jpg|link=Vacuum pump (Edwards SpeediVac ED200)|[[Vacuum pump (Edwards SpeediVac ED200)]]
</gallery>
</gallery>


* Vacuum Former (complete) - Lorin - ?? - ?? - ??
==Removed equipment==
 
==Old Equipment Removed==


In case they are brought back, or, so people who could have sworn we had a tool know it was removed.
In case they are brought back, or, so people who could have sworn we had a tool know it was removed.


<gallery>
<gallery style="background: darksalmon" mode="nolines">
File:3DP_RapMan.jpg|link=3D printer (3D Systems RapMan)|[[3D printer (3D Systems RapMan)]]
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3D printer, Come3D!.jpg|link=3D printer (Come3D!)|[[3D printer (Come3D!)]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3DP_Cupcake.jpg|link=3D printer (MakerBot Cupcake)|[[3D printer (MakerBot Cupcake)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:1.jpg|link=1              |[[3D printer, FFF (IIIP) ID:1]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:3D printer, Nathan Ward's RepRap.jpg|link=3D printer, FFF (RepRap)|[[3D printer, FFF (RepRap)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Yin's Wanhao.jpg|link=3D printer, FFF (Wanhao Duplicator i3)|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:InVision si2.jpg|link=3D printer, MJM (3D Systems InVision si2)|[[3D printer, MJM (3D Systems InVision si2)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:Compressor_Dewalt.jpg|link=Air compressor, 4-gallon (DeWalt)|[[Air compressor, 4-gallon (DeWalt)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:Compressor_Big.jpg|link=Air compressor, 17-gallon|[[Air compressor, 17-gallon]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Reciprocating_compressor.jpg|link=Air compressor, 80-gallon (Ingersoll Rand T30)|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Angle_Grinder.jpg|link=Angle grinder (Kawasaki)|[[Angle grinder (Kawasaki)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:Anvil_75lb.jpg|link=Anvil|[[Anvil]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Bandsaw_Horizontal.jpg|link=Bandsaw, metal, horizontal (Craftex B013N)|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Horizontal bandsaw, old.jpg|link=Bandsaw, metal, horizontal (Pit Bull)|[[Bandsaw, metal, horizontal (Pit Bull)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Bending_Brake.jpg|link=Bending brake, 30" (Powerfist)|[[Bending brake, 30" (Powerfist)]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Buffer_Benchtop.jpg|link=Buffer (Clarke 2H 5AB)|[[Buffer (Clarke 2H 5AB)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Dewars.jpg|link=Dewars, 50-litre|[[Dewars, 50-litre]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Drill_Dewalt.jpg|link=Drill, corded (DeWalt)|[[Drill, corded (DeWalt)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:Pick_N_Place.jpg|link=Electronics assembly pick and place machine (Multitronics 2000LX)|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Forge_Propane_2.jpg|link=Forge, propane (Jim's)|[[Forge, propane (Jim's)]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:Impact_Driver.jpg|link=Impact driver (DeWalt)|[[Impact driver (DeWalt)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:7.jpg|link=7              |[[Laser cutter, small ID:7]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Lathe, South Bend.jpg|link=Lathe, metal (South Bend)|[[Lathe, metal (South Bend)]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Lathe, Torrent T.72-42.jpg|link=Lathe, metal (Torrent T.72-42)|[[Lathe, metal (Torrent T.72-42)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Lathe_Mill.jpg|link=Lathe–mill combination (Craftex B2229)|[[Lathe–mill combination (Craftex B2229)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:Lathe_Wood_Mini.jpg|link=Lathe, wood (Haussmann)|[[Lathe, wood (Haussmann)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:MaxNC10.jpg|link=Milling machine, CNC, mini (MAXNC 10)|[[Milling machine, CNC, mini (MAXNC 10)]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:CNC mill (Terry's).jpg|link=Milling machine, CNC (Terry's)|[[Milling machine, CNC (Terry's)]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:DMM, Excel DT9205A.jpg|link=Multimeter, digital (Excel DT9205A)|[[Multimeter, digital (Excel DT9205A)]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:DMM, Powerfist DT 9208.jpg|link=Multimeter, digital (Powerfist DT 9208A)|[[Multimeter, digital (Powerfist DT 9208A)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Audio mixing board.jpg|link=PA system (Dan Damron's)|[[PA system (Dan Damron's)]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Parts washer, Powerfist 3.5 L.jpg|link=Parts washer, 3.5 L (Powerfist)|[[Parts washer, 3.5 L (Powerfist)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Plasma cutter, Hypertherm 45.jpg|link=Plasma cutter (Hypertherm 45)|[[Plasma cutter (Hypertherm 45)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:plasma_cutter.thumbnail.jpg|link=Plasma cutter, CNC (Kyle Paavola's)|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Router_Plunge_Makita.jpg|link=Router, plunge (Makita 3612BR)|[[Router, plunge (Makita 3612BR)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:Plunge router (green).jpg|link=Router, green|[[Router, green]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:NoImage.png|link=81        |[[Router table, wooden ID:81]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Chop_Saw.jpg|link=Saw, compound mitre (Ryobi)|[[Saw, compound mitre (Ryobi)]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Chopsaw_Metal.jpg|link=Saw, compound mitre, metal (Ryobi)|[[Saw, compound mitre, metal (Ryobi)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Reciprocating_Saw.jpg|link=Saw, sabre (Mastercraft)|[[Saw, sabre (Mastercraft)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:Skil_Saw_BD.jpg|link=Saw, handheld circular, 7 1/4" (Black & Decker)|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:Skil_Saw_Red.jpg|link=Saw, handheld circular (Skil)|[[Saw, handheld circular (Skil)]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:Shaper, metal.jpg|link=Shaper, 7"|[[Shaper, 7"]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Taps_Grey.jpg|link=Tap & die set (Mastercraft)|[[Tap & die set (Mastercraft)]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:OxyAce_Mini.jpg|link=Torch, oxygen–acetylene, mini|[[Torch, oxygen–acetylene, mini]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Vice_Medium.jpg|link=Vise, medium (Irwin)|[[Vise, medium (Irwin)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Welder_MIG.jpg|link=Welder, MIG (Lincoln Weld-Pak 100)|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:55.jpg|link=55            |[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>
</gallery>
* 3D Printer (Ultimaker) - Brian Queen - ?? - Working okay, needs heated bed - ??
* Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - Loaned While Members - Needs plumbing and wiring fix
* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Sewing Machine (Kenmore) - Gina N - Donated to Protospace - Working - Open To Members

Latest revision as of 04:59, 20 March 2024

Want to add a new tool? Follow this procedure!

We can always use new tools. Please feel free to contact Protospace to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed tool wish list, but your best bet on figuring out if we want something is simply asking on our forum.

We also have an alphabetically ordered and categorized tool catalog.

Rapid prototyping tools

Comparisons: our 3D printers, our laser cutters

Automotive tools

Chemistry

Electronics equipment

Metalworking tools

Woodworking and plasticworking tools

Textile, Vinyl, and Media tools

Measuring and inspection tools

See also: the electronics equipment section on this page for electrical and electronic measurement and test equipment.

Miscellaneous tools

Removed equipment

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.