Power Levels: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
 
Line 6: Line 6:
==Cut Mode==
==Cut Mode==


===Metal===
===Powder Coated Aluminium===


<gallery>
<gallery>
File:Wintr-sigil.jpeg|Powder Coated Aluminum<br>Speed: 20<br>Power: 40<br>Date: 13.03.04
File:Wintr-sigil.jpeg|Powder Coated Aluminium<br>Speed: 20<br>Power: 40<br>Date: 13.03.04
</gallery>
</gallery>


==Engrave Mode==
==Engrave Mode==


===Leather===
===Vegetable Tanned Leather===


<gallery>
<gallery>
File:LeatherEngrave.jpg|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.
File:LeatherEngrave.jpg|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.
</gallery>
</gallery>

Latest revision as of 17:05, 12 April 2015

Back to the Laser Cutter

Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr


Cut Mode

Powder Coated Aluminium

Engrave Mode

Vegetable Tanned Leather