Plasma cutter, huge (Powercut 1500) ID:51: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
m (Updated template names)
m (Added id)
Line 1: Line 1:
{{Equipment page
{{Equipment page
|toolname=Plasma cutter
| toolname = Plasma cutter
|model=Powercut 1500
| model = Powercut 1500
|serial=??
| serial = ??
|owner=William
| owner = William
|loanstatus=Donated to Protospace
| loanstatus = Donated to Protospace
|arrived=July 2012
| arrived = July 2012
|location=Welding/Metalworking Shop
| location = Welding/Metalworking Shop
|status=Near Functional (read Repair Notes)
| status = Near Functional (read Repair Notes)
|permission=Open to Members & Friends
| permission = Open to Members & Friends
|certification=Must be certified
| certification = Must be certified
|itemphoto=[[File:Plasma_Cutter_Yellow.jpg|350px|thumb|right|]]
| id = 51
| itemphoto = [[File:Plasma_Cutter_Yellow.jpg|350px|thumb|right|]]
}}
}}



Revision as of 23:52, 25 November 2016

← Back to tools we have

51.jpg
Type Plasma cutter
Make/Model Powercut 1500
Serial number ??
Original owner William
Loan status Donated to Protospace
Arrival date July 2012
Location Welding/Metalworking Shop
Functional status Near Functional (read Repair Notes)
Usage permissions Open to Members & Friends
Certification Must be certified
Wiki-ID 51
Label 1.0" 1.5" 2.0"

Usage Notes

  • Cuts metal via plasma arc
  • Eye protection must be worn at all times, (welding helmet or oxy/ace goggles suffice)
  • Leather gloves/sleeves required
  • Place workpiece on a raised surface, do not cut flush against floor or workbench
  • Attach grounding clamp, ensure good contact (no paint)
  • Set cutting power & air pressure according to workpiece thickness
  • NEVER cut without air supply at sufficient pressure, requires airflow for cooling
  • DO NOT make contact with tip to workplace, this melts the tip.
  • Tips gradually wear out, are consumable.

Specs

  • 3ph input
  • 20-90A output
  • Requires high volume compressed air supply