Oxygen concentrator (OGSI OG-15) ID:12: Difference between revisions
Jump to navigation
Jump to search
Ian Oliver (talk | contribs) (updated location and added note that the intake filter should be checked more often because Protospace is dusty) |
m (Cjs moved page Oxygen concentrator to Oxygen concentrator (OGSI OG-15): Updated to follow naming conventions.) |
(No difference)
| |
Revision as of 06:58, 4 November 2016
| [[File:{{{id}}}.jpg|250px]] | |
| Type | Oxygen concentrator |
| Make/Model | OGSI OG-15 |
| Serial number | ?? |
| Original owner | Ryan Turner |
| Loan status | Donated to Protospace |
| Arrival date | 2013-05-10 |
| Location | Useful Room |
| Functional status | Working |
| Usage permissions | Open to Members |
| Certification | Demo/Notes Required |
| Wiki-ID | [[{{{id}}}]] |
| Label | 1.0" 1.5" 2.0" |
Usage Notes
- Removes mostly nitrogen from normal air, leaving 93% pure oxygen.
- Useable for small torches (oxygen on demand, no bottles)
- Useable for aquaponics projects (can increase fish density)
- Check and clean inlet air filter every 6 months (probably far more often at Protospace); note this before use. Instruction Video Showing How
Specs
- Manual
- 120V
- 0.3hp compressor
- 700W max
- 12 psi
- 15 standard cubic feet per hour (0.25 SCFM)
- 24 hour/day operation
- Less than 500 hours on unit when arrived.
Upgrade Notes
- Would be much more useful if could be used to refill oxygen bottle from the large oxy/ace torches. A second compressor is needed.