Milling machine (ACRA AM4V) ID:48

From Protospace Wiki
Revision as of 18:57, 8 April 2017 by Aerobatpat (talk | contribs)
Jump to navigation Jump to search
This page needs a better picture.
You can help improve this page by adding one.
Reason: set up, less cluttered
Tagged since: 2015-12-23


← Back to tools we have

48.jpg
Type Milling machine
Make/Model ACRA AM4V
Serial number ??
Original owner Protospace
Loan status Owned by Protospace
Arrival date 2015-12-22
Location Metal shop
Functional status Needs Work: needs to be cleaned and set up
Usage permissions Open to full members
Certification Certification Required: lathe and mill training (upcoming as of 2015-12)
Wiki-ID 48
Label 1.0" 1.5" 2.0"

Specifications

Documents

DRO (Digital Read Out)

Link to DRO User Manual: http://www.acu-rite.com/pdf/anilam/ANILAM_Wizard_DRO_Support/Wiz450DRO_4.pdf

History

This lathe was bought by Protospace using funding approved for the purchase of new machine tools at the December 2015 members' meeting. It was picked up and brought to Protospace on 2015-12-22 along with the Challenger lathe and the new 80-gallon air compressor.