Laser cutter (Trotec Speedy 300) ID:107

← Back to tools we have

Type	Trotec
Make/Model	Speedy 300
Serial number	S3-4699
Original owner	Protospace
Loan status	Owned by Protospace
Arrival date	December 2016
Location	Bay 108, near the door to the front rooms
Functional status	Working
Usage permissions	Members & Friends Only
Certification	Must complete Laser Certification and Trotec Certification
Wiki-ID	107
Label	1.0" 1.5" 2.0"

Specs

Working bed size: 730mm x 430mm (28 3/4" x 17" ish) 1000DPI engraving resolution Kerf size 0.1mm

Supported file formats: DXF, CDR, SVG, AI

Documentation

Speedy 300 Product Manual

Speedy 300 Service Manual

JobControl 11.2 Operation Manual

Power Control through Color Selection Table from the JobControl 11.2 Manual

Trotec Training

Engraves can be done with embedded image files (PNG et al) or with vector fills (Unlike rabbit which does not receive fill information)

Maximum material thickness: 1/2" Higher thicknesses generally have worse edge finishing because of beam spreading out at top and bottom

It is imperative that you do a chlorine test on unapproved materials before working on them with any laser cutter.

Please try any new, strange, or unknown materials in the Rabbit first, and closely watch them for flame or dense black smoke. The lens is very exposed on the Trotec and thick smokey materials, like resin-y woods, rubber, or some plastics, can very quickly damage the machine and potentially the lungs of everyone in the space. Start with low power tests and work your way up.