Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

From Protospace Wiki
Jump to navigation Jump to search

← Back to tools we have

[[File:{{{id}}}.jpg|250px]]
Type Laser Cutter
Make/Model RL1290
Serial number ??
Original owner Brian Queen
Loan status Semi-Permanent Loan
Arrival date Before 2013
Location Main Bay
Functional status Functional
Usage permissions Members & Friends Only
Certification Must complete Laser Certification
Wiki-ID [[{{{id}}}]]
Label 1.0" 1.5" 2.0"

Specs

  • 80 watt
  • 4x3' CNC bed
  • Front shield can be dropped to insert pieces longer than 3'
  • Water cooled & Ducted
  • Can cut or etch up to 1/2" thick light materials such as woods and some plastics
  • Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

Usage Notes

  • Complete Laser Certification to learn how to use the laser. Training is offered about once a month.
  • Perform a simple Chlorine Test on unapproved materials, as cutting or etching chlorinated materials damages the optics
  • See Power Levels page for notes and details on cutting and etching various materials
  • Power modulation only in restricted range in software (Aproximately 8%-30%)
  • Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
  • Consult our Laser Standard Operating Procedure

History

  • Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
    • Loan has been extended.

Repairs Needed

  • Upgrades discussed
    • Adding air cooling to optics and laser head block
    • Convincing power supply to modulate power levels properly
    • Seal display on controller to prevent smoke from clouding over time.