Difference between revisions of "Laser cutter, large (Rabbit Laser RL-80-1290) ID:6"

From Protospace Wiki
Jump to: navigation, search
m
m
Line 26: Line 26:
  
  
{{Box.Warning|It is imperative that you do a [[Chlorine Test]] on unknown materials before working on them with the Laser Cutter}}
+
{{Box.Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}
  
  

Revision as of 14:09, 22 November 2015


← Back to tools gallery

6.jpg


  • Type: Laser Cutter
  • Make/Model: RL1290
  • Serial Number: ??
  • Original Owner: Brian Queen
  • Loan Status: Semi-Permanent Loan
  • Arrival Date: Before 2013
  • Location: Main Bay
  • Functional Status: Functional
  • Usage Permissions: Members & Friends Only
  • Certification: Must complete Laser Certification
  • Wiki ID: [[{{{id}}}]]


It is imperative that you do a Chlorine Test on unapproved materials before working on them with the Laser Cutter


Specs

  • 80 watt
  • 4x3' CNC bed
  • Front shield can be dropped to insert pieces longer than 3'
  • Water cooled & Ducted
  • Can cut or etch up to 1/2" thick light materials such as woods and some plastics
  • Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

Usage Notes

  • Complete Laser Certification to learn how to use the laser. Training is offered about once a month.
  • Perform a simple Chlorine Test on unapproved materials, as cutting or etching chlorinated materials damages the optics
  • See Power Levels page for notes and details on cutting and etching various materials
  • Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
  • Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
  • Consult our Laser Standard Operating Procedure

History

  • Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
    • Loan has been extended.

Repairs Needed

  • Upgrades discussed
    • Adding air cooling to optics and laser head block
    • Convincing power supply to modulate power levels properly
    • Seal display on controller to prevent smoke from clouding over time.