Laser Vacuum Table: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
mNo edit summary
(updated name of Category:Ongoing projects instead of moving it to Category:Past projects in the hope that Matt will resume work on this project)
Line 24: Line 24:




[[Category:OngoingProjects]]
[[Category:Ongoing projects]]

Revision as of 05:11, 2 June 2016

Laser Vac 01.jpg

Info

Member name: Matt F

Member contact: Email, found via list.

Project name & pitch: This is a small vacuum table for the laser, to belong to Protospace, so that you can cut paper/fabric without it blowing away from the laser's air nozzle.

Storage location: Bay ?? or cart

Project start date: 31 Aug, 2013

Final Deadline: 01 Nov, 2013

Updates

  • 02 Sept, 2013 - Vacuum is strapped to frame, box prototype is done. Vacuum is too loud. Considering running directly off of HVAC instead for low pressure air source.
  • 12 Sept, 2013 - No progress. Laser's still down.
  • 20 Sept, 2013 - No progress. Laser's still down.
  • 27 Sept, 2013 - No progress. Laser's still down.
  • 09 Oct, 2013 - No progress. Laser's still down.