View source for Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117

{{Equipment page
| toolname = Handheld hot-wire foam cutter
| model = Woodland Scenics HOTWRFMCUTR
| serial = ??
| owner = ??
| loanstatus = Donation to Protospace
| arrived = ??
| location = Under the stairs in Bay 108, all the way back in the corner on the first shelf from the floor
| status = Works, though the wire is currently broken
| permission = Open to all
| certification = None
| id = 117
| itemphoto = [[File:117.jpg|350px|thumb|right|]]
}}

[[Category:Foamworking tools]]
[[Category:Power tools]]

== Specifications ==
* Wire: Nichrome, 30 AWG
* Power:
** 9 V AC, supplied by attached 120 V A adapter
* Cut depth: 4.5"
* Cut throat: 5.5" (officially 6", but measured as 5.5")

== Operation & safety ==
{{Warning|Be careful! The hot wire is under tension while cutting. If it overheats, it could break and throw molten nichrome at you.}}

Plug it in. It heats up. Pass it through foam to cut.

== Documents ==
* [http://woodlandscenics.woodlandscenics.com/show/Item/HOTWRFMCUTR/page/1? Product page]