Drill press, 8" (Jobmate) ID:69

From Protospace Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

← Back to tools we have

69.jpg
Type Drill Press
Make/Model Jobmate 8"
Serial number ??
Original owner Thomas L
Loan status Long term loan
Arrival date Fall 2010
Location Woodworking Shop
Functional status Working
Usage permissions Open to Members & Friends
Certification Self-Taught
Wiki-ID 69
Label 1.0" 1.5" 2.0"

Usage Notes

  • There are 3 belt settings, ensure the belt setting is correct for the material
  • Adjust bit with chuck key, then return chuck key to its holder
  • Twist chuck by hand to ensure bit is centered, not stuck between two jaws
  • Adjust table height/position by loosening rear left bolt, then lifting the table manually (twisting left and right helps)
  • Ensure table hole is lined up with bit. If not, bit will drill through table and ruin it (note existing "extra" hole)
  • Tighten rear-left bolt to secure table
  • Ensure workpiece is secured

Specs

  • Jobmate Bench Drill Press, 8-in
  • Adjustable depth stop for accurate measurement. Tilting table with clamping slots. Column to chuck is 4" (10.16cm). 1/2" keyed chuck