Air compressor, 80-gallon (Ingersoll Rand T30)

From Protospace Wiki
Revision as of 01:05, 2 January 2016 by Ian Oliver (talk | contribs) (added replacements)
Jump to navigation Jump to search

← Back to tools we have

Reciprocating compressor.jpg
This article is about a tool that is no longer at Protospace.
Further information can be found below.
  • Type: Two-stage reciprocating compressor
  • Make/Model: Ingersoll-Rand T30 242ON5
  • Serial Number: 30T 758634
  • Original Owner: Kyle Paavola
  • Removed by: Kyle Paavola
  • Removal Reason: ended membership
  • Loan Status: Long Term Loan
  • Arrival Date:
  • Removal Date: 2015-12-02
  • Replacements: air compressor, 60-gallon (Campbell Hausfeld) and air compressor, 80-gallon (MAXair Premium)
  • Location: Right of the welding bench
  • Functional Status: Working
  • Usage Permissions: Members and friends only
  • Certification: To be determined. Do not start if you don't feel qualified
  • Wiki-ID: [[{{{id}}}]]

Specs

This compressor is an industrial grade machine to be treated with some degree of respect. This 5HP compressor is electrically driven by 208V single phase available through the same pigtail that powers the TIG welder.

208V pigtail.jpg

This compressor is capable of substantially higher pressure than most air tools can tolerate, which is why its discharge pressure is regulated to 100 psi. Do not adjust this regulator without consulting with Kyle. Doing so may damage your equipment or hurt you seriously.

Regulator and filter.jpg

Use and Maintenance

verbatim from the sticker right on the compressor but just in case you have not read it:

CAUTION: TURN OFF POWER BEFORE SERVICING

Daily:

  • Drain any condensate from ceceiver and traps
  • Check for any unusual noise or vibration

Weekly

  • Check for proper oil level

Compressor cranck case.jpg

Monthly

  • Clean air filter
  • Clean all external parts of compressor and driver
  • Test relief valve manually for proper operation
  • Inspect entire air system for leaks
  • Inspect oil for contamination and change if necessary
  • Check belt tension and wear

Every 3 months:

  • Change oil using an approved lubricant
  • Inspect valve assemblies

for more information, check the operator's manual at: http://manualarchive.ingersollrandproducts.com/ir_pdfs/Compressed%20Air/Air%20Compressors/Reciprocating%20Compressor/22607402.PDF

Approved Lubricant

ONLY Ingersoll-Rand All season oil is currently approved for use in this compressor. You must check for the presence of oil in the compressor pan before operating this machine.

QR Code

Error creating thumbnail: File missing