3D Scanning (archived - 2012)

From Protospace Wiki
Revision as of 05:02, 2 June 2016 by Ian Oliver (talk | contribs) (archived page)
Jump to navigation Jump to search
This page is archived as its information is no longer current.
Last update: in January 2012.
Current information on this subject can be found at some other page.


Here be where you place your research on 3D Scanning


Members Involved

Project Scope

To continuously research and develop amateur 3D scanning techniques (either with a laser a camera).

Details

http://forums.hackaday.com/viewtopic.php?f=3&t=153 Was the original inspiration, however it is based on ridiculously expensive (399eu) software.

https://github.com/Matt-S/Open3DScanner/wiki Is more like what I'm proposing to build

Use an arduino, simple L293D bipolar stepper driver circuit, and throw in a 10k? Pot to an analog pin for speed adjustment.

Got a laser, but we may want to play with optics for precision

The hunt for an open source windows GUI software continues, lots exists, but mostly command line

One member offered a kinect,

Progress thus far

To Do

Future Additions